. China lisebelisoa tse thusang tsa coil ho coil line feme le bafani ba thepa |Zhongshuo

WUXI ZHONGSHUO MACHINERY CO., LTD

Lisebelisoa tse thusang bakeng sa mohala oa khoele

Tlhaloso e Khutšoanyane:

CPL e sebelisoa haholo-holo bakeng sa ho tlosoa ha mefokolo e nyenyane ho batang ho roala SS coil ka metsi, fumana ho qeta ho khabisa, ke hore No.3, No.4, HL, SB & Duplo.Pholiso e ka ba emulsion kapa mineral.Sistimi ea tlhoekiso e pholileng le ea ho e sebelisa hape e bohlokoa moleng o felletseng.ZS CPL e etselitsoe ...


  • Boema-kepe:Shanghai, China
  • Melao ea Tefo:T/T.L/C
  • Bokhoni ba Tlhahiso:20 lihlopha / selemo
  • Lintlha tsa Sehlahisoa

    Kenyelletso ea Khampani

    MORERO PONTS'O

    CPL e sebelisoa haholo-holo bakeng sa ho tlosoa ha mefokolo e nyenyane ho batang ho roala SS coil ka metsi, fumana ho qeta ho khabisa, ke hore No.3, No.4, HL, SB & Duplo.Pholiso e ka ba emulsion kapa mineral.Sistimi ea tlhoekiso e pholileng le ea ho e sebelisa hape e bohlokoa moleng o felletseng.ZS CPL e etselitsoe bakeng sa khola e batang ho sebetsa ho tloha ho 100 ho isa ho 1600 mm bophara le botenya bo pakeng tsa 0.4 ho isa ho 3.0 mm.

    WUXI ZS e boetse e fana ka CPL e omileng.Cork lebanta e tla sebelisoa ho fumana qetello e tšoanang le ea Scotch-Brite finishing (SB), lebelo la ho fepa la CPL e omileng e ka ba 50m / min kapa ho feta.

    Molemo oa ZS CPL
    1. Mofani oa tharollo, ZS e fana ka mohala o feletseng o kenyeletsang Unwinder, Rewinder, Loading Car, Pinch Roll, Flattener, Crop Shear, Ho hlatsoa le ho omisa tsamaiso, PVC coater.Ka nako e tšoanang re fana ka Coolant Filtration le Recycling System, Mist
    2. Mokelli, Mokhoa oa ho Loantša Mollo le Mochini oa Briquetting.
    3. Ha ho na liphoso le letšoao la ho qoqa ho tloha moleng
    4. Lebelo la line ho fihlela ho 40m / min max.
    5. Mohala o loketse tlhahiso e tsoelang pele ea lihora tsa 24
    6. Boemo bo phahameng ba Automation, ke hore Constant Load.Welding Seam Tracking System (phepelo ea boikhethelo ka welder)
    7. Ts'ebetso le tlhokomelo e bonolo

    Lintlha tsa line

    Mofuta oa thepa: Likhoele tsa tšepe tse sa hloekang
    Matla a maholo a ho tiea:

    N / mm2

    -850
    Min / Max botenya ba thepa:

    mm

    0.4 - 3
    Bophara ba sekhahla bonyane/boholo:

    mm

    600 - 1600
    Boima ba li-coil bo bongata ha ho kenoa:

    t

    30
    Koli ea ho kena ka bophara ba min/max:

    mm

    1000 - 2100
    Bophara ba ka hare ba coil:

    mm

    508/610
    Boima ba li-coil ha u tsoa:

    t

    30
    Tsoa ka bophara ba khoele min/max:

    mm

    1000 - 2100
    Tloha ka hare ho bophara ba coil:

    mm

    508/610
    Lebelo la mohala:

    m/m.

    Max.40 bakeng sa ho khutlisetsa morao.5-35m/min bakeng sa ho sebetsa

  • E fetileng:
  • E 'ngoe:

  • Kenyelletso ea Khampani

     

    Nalane ea rona:

    Setsebi sa Ho Sila ka Lebanta la Lebanta la Flat Abrasives: Sepheo sena se re tataisa ho boloka lipatlisiso mabapi le ho sila le ho bentša tšepe ka sebaka sa li-abrasives tse tlotsitsoeng ho tloha ka bo-1990.

    Ka 2005 re ile ra qala ho rala, ho etsa le ho kopanya mechine e silang ea mabanta a abrasive bakeng sa tšepe.Ka keketseho e tsoelang pele ea khoebo le phetoho ea sebopeho sa ba nang le kabelo,

    ka 2015 WUXI Zhongshuo Precision Machinery Co., Ltd e thehiloe.

     

    Khampani ea rona:

    Re khamphani e laoloang ke beng ba boholo bo bohareng.Khamphani e toropong ea Wuxi, Profinseng ea Jiangsu.Motse-moholo o ngolisitsoeng ke li-RMB tse limilione tse 8.Sebaka sa kaho se feta 7000 m2.Palo eohle ea basebetsi ke 52, ho kenyelletsa le moenjiniere a le mong oa boemo ba Patlisiso, baenjiniere ba 2 ba phahameng le baenjiniere ba 5.Re na le litsebi tsa ho rala, ho etsa thepa, ho kopanya, ho kenya, ho laela le sehlopha sa litšebeletso tsa thekiso.

    Lihlahisoa tsa rona

    Re hlahisa mochini o pharalletseng oa ho sila le oa ho bentša, mochini oa borashe, mochini o tlatsang seipone, mochini o qetang ho sisinyeha, mochini o hatisang bakeng sa tšepe ea tšepe le lakane, ho kenyelletsa le karolo ea ho kena le ho tsoa ea CGL (Coil to Coil Repairing Grinding Line for Steel Maker) le CPL (Coil). ho Coil Polishing Line bakeng sa Setsi sa Tšebeletso), ke hore Unwinder, Rewinder, Loading Car, Pinch Roll, Flattener, Crop Shear, Coolant Filtration le Recycling system, Washing and Drying system, Mist Collector, Fire Fighting system.Re boetse re fana ka sesebelisoa sa Loading se nang le Vacuum Cups Group bakeng sa Sheet to Sheet Grinding Lin

    Bareki ba rona:

    Lethathamo la rona la litšupiso ho kenyelletsa Tisco Daming, Wuxi Puxin, Zhejiang Bohai le bareki ba bang ba tsebahalang ba China.Re ile ra romella lihlahisoa tsa rona naheng ea Europe joalo ka Italy, Turkey ka Setifikeiti sa CE.Re boetse re fana ka grinder ea ho lokisa lebanta ho moetsi oa China ea fanang ka thepa ho Aircraft and Nuclear In.

    bareki ba rona

     

    Setifikeiti sa rona

     

     

     

    Merero

    DMSSC

     

     

     

     

    Ho theha boleng ho moreki ke sepheo sa rona sa kamehla.Khotsofalo ea hau ke matla a tlhahiso ea rona e tsoelang pele.

     

     

    CPL-Coil to Coil Polishing Line bakeng sa Setsi sa Tšebeletso sa Stainless Steel 

    CLIENT:浦新金属

    Mohala oa ho bentša khola bakeng sa DMSSC

    CPL e sebelisoa haholo-holo bakeng sa ho tlosoa ha mefokolo e nyenyane ho batang ho roala SS coil ka metsi, fumana ho qeta ho khabisa, ke hore No.3, No.4, HL, SB & Duplo.Pholiso e ka ba emulsion kapa oli ea diminerale.Sistimi ea tlhoekiso e pholileng le ea ho e sebelisa hape e bohlokoa moleng o felletseng.ZS CPL e etselitsoe bakeng sa khola e batang ho sebetsa ho tloha ho 100 ho isa ho 1600 mm bophara le botenya bo pakeng tsa 0.4 ho isa ho 3.0 mm.WUXI ZS e boetse e fana ka CPL e omileng.Cork lebanta e tla sebelisoa ho fumana qetello e tšoanang le ea Scotch-Brite finishing (SB), lebelo la ho fepa la CPL e omileng e ka ba 50m / min kapa ho feta.

    SPL-Sheet to Sheet Polishing Line(Mofuta o Metsi)

    CLIENT:太钢大明

    3

    Mochini oa ho Sila oa Sheet to Sheet (Mofuta oa Metsi) o sebelisa Oli ea ho Sila kapa Emulsion joalo ka Media ho fihlela phello e ntle le e benyang ea ho sila ho lishiti tsa tšepe tse chesang kapa tse batang kapa likhoele.Mochini o etselitsoe ho fumana Finishing No.3 (Coarse Finishing, Abrasive Grain From G60 ho G150) kapa No.4 (Fine Finishing, Most Popular, abrasive grain ho tloha G180 Kapa holimo) le HL Finishing (Hairline Finishing, Characterized by Smooth le mola o molelele).ZSSPL e etselitsoe ho bataho sila letlakaho sebetsa ho tloha600 ho2200 mm bophara le botenya pakeng tsa 0.4 ho 3.0 mm.

     

    PGL-Grinding Polishing Line for Heavy Plate

    CLIENT:西部金属

     4

    Full Automatic Grinding and polishing Line e sebelisoa haholo-holo bakeng sa ho tlosa bofokoli ho tloha ho hot rolling, pickling & annealing process le residual scale, le ho finyella botenya le boima bo batloang.Pholiso e ka ba emulsion kapa oli ea diminerale.Sistimi ea tlhoekiso e pholileng le ea ho e sebelisa hape e bohlokoa moleng o felletseng.ZSPGLe etselitsoe ho sebetsana le poleiti e boima e chesang ho tloha ho 600 ho isa ho 2200 mm bophara le botenya bo pakeng tsa 1.0 ho isa ho 30 mm.WUXI ZS e boetse e fana ka PGL e omileng.

    Seipone Finishing(8K) Machine bakeng sa Stainless Steel Plate

    CLIENT:新华医疗

    5

    Monyetla oa WUXI 25 Seipone Finishing Machine bakeng sa Stainless Steel Coil le Sheet.Lihlooho tse hlakileng tsa sehlopha ka seng li ka ikemela kapa ka kakaretso lifted up and down .Refiling tsa motsoako oa ho bentša ho qoba bokaholimo bo ka tlas'a disc ea polishing fumana burnt.Tšepe e sa hloekang e entsoeng .Anti corrosion le nako e telelebophelo.Motsamao o boreleli o boreleli ka tataiso ea mola.

     

    Seipone Finishing Machine bakeng sa Cold Rolling Coil le Sheet

    CLIENT:MINOX(INDIA)

    6

    Mofuta oa pinch roll.E sebetsa resin bonded grinding lebili, Scotch-Brite disc, polishing compound comprising of 5% Al2O3 + 5% nitric acid + 90% metsi ho ntlafatsa holim'a roughness kgato ka kgato, qetellong bartolomeo seipone finishing ka fumanoa (8K).

    Sesebelisoa sa ho Laola/Ho laolla se nang le Sehlopha sa Vacuum Cup

    CLIENT:博海金属

    7

    E na le foreimi ea gantry e entsoeng ka welded, carbon steel le tekanyo e loketseng ho tšehetsa khatello ea kelello ea ho sebetsa.Sesebediswa se na le dihlopha tse latelang: Yuniti ya ho fetolela, Karolo ya ho phahamisa, Yuniti ya Vacuum pick up.

    Karolo ea phetolelo e tataisoa ke tataiso ea liner, e tsamaisoang ke servo motor ka gear le pinion.Karolo ea ho phahamisa e tataisoang ke tataiso ea liner, e tsamaisoang ke piston ea moea.Pick-up unit e entsoe ka li-bars tse 3 tse fetolehang tse nang le linoelo tse 18, bar e maemong a tsitsitseng empa kopi e 'ngoe le e' ngoe e monyang e khona ho tsamaea ka bolelele, opareitara e khona ho lokolla sesebelisoa, ho lokisa boemo ba kopi ea ho monya, ho notlela hape ho lokisa habonolo.

    Komiki e 'ngoe le e' ngoe ea ho monya e hokahane le phaephe ea moea ea motho ka mong ho netefatsa ts'ebetso e bonolo ea sistimi, kopi e 'ngoe le e' ngoe ea ho monya e hokahantsoe le sebaka sa selemo ho netefatsa sebaka se lekaneng sa ho buffer pakeng tsa linoelo le karolo ea mosebetsi.

    Laminator e Ikemetseng bakeng sa Tšireletso ea Lifilimi (Mochini oa ho roala oa PVC)

    CLIENT: MALA WA TŠEPE(ITALY)

     8

    Automatic Laminator / PVC Coating Machine e sebelisoa haholo bakeng sa Film Lamination on Sheet Surface.E ka etsoa bakeng sa Double side Double layer Laminating.

    Lamination e iketsang, ho itšeha ka ho iketsa.

    * Mokhoa oa Mochine: Mofuta oa 400-2500

    * Bophara bo sebetsang: 400-2500MM

    * Lebelo la ho sebetsa: Lebelo le tsitsitseng / Lebelo le Fetohang

    * Kopo: Mochini ona o sebelisoa haholo ho Coiler/De-coiler System,
    Mochini o benyang, Mochini oa ho bentša ka seipone sa 8K, Sehiloeng ho ea ho Length Line,
    Mochini oa ho sila jj.

    * Mechini e ka etsoa ka mokhoa o ikhethileng.

    Ngola molaetsa wa hao mona mme o re romele wona

    Lihlopha tsa lihlahisoa